I-o Data Network & Wireless Cards Driver Download

Summary :

I-O DATA offers a wide range of advanced network equipment including wireless LAN devices, which are very useful for comfortable PC life, and gigabit Ethernet devices, which will generate ever growing demand by the developing of infrastructure. We help you build an advanced network environment whether at home or in the office. I-O DATA provides simple solutions for storing and managing of crucial data through innovative storage products, which are compatible with the latest. The I/O subsystem of a computer provides an efficient mode of communication between the central system and the outside environment. It handles all the input-output operations of the computer system. The ETH32 is a general purpose I/O device which communicates using TCP/IP over an ethernet network. This device is ideally suited for remote data acquisition or device control; all that is needed is a connection to an ethernet network. The ETH32 supports up to five simultaneous TCP/IP connections, allowing multiple computers to communicate with the ETH32 device at one time.

Short for input/output (pronounced “eye-oh”). The term I/O is used to describe any program, operation or device that transfers data to or from a computer and to or from a peripheral device. Every transfer is an output from one device and an input into another. Input/output virtualization is a methodology to simplify management, lower costs and improve performance of servers in enterprise environments. I/O virtualization environments are created by abstracting the upper layer protocols from the physical connections. The technology enables one physical adapter card to appear as multiple virtual network interface cards and virtual host bus adapters. Virtual NICs and HBAs function as conventional NICs and HBAs, and are designed to be compatible with exist.

What is I/O device error and how to fix it without affecting the original data? This article will help you understand the origin and solution of the I/O device error. Try MiniTool software to recover lost data.

Quick Navigation :

I cannot access my external hard drive due to the following error message: 'Drive is not accessible. The request could not be performed because of an I/O device error.' (Picture below)

Read this post to find reliable solutions to fix this I/O device error external hard drive as well as removable media without the loss of any data.

Part 1: What Is An I/O Device Error?

An I/O device error (short for Input/Output device error) happens when Windows is not able to perform an input/output action (such as reading or copying data) when it is trying to access a drive or disk.

It can occur to many different types of hardware devices or media.

Note: Sometimes, an I/O device error may occur when you try to access the floppy disk drive in Windows XP Service Pack.

Reasons for I/O Device Error

  • This plugged storage device is incorrectly connected. PC cannot detect your connected device normally.
  • The computer USB port or USB card reader is damaged or broken.
  • The computer storage device driver is outdated, damaged or incompatible with your attached device.
  • The external hard drive, memory card or USB drive is recognized with a wrong drive letter.
  • The external hard drive, memory card or USB drive that you are trying to access is dirty or damaged.
  • Windows is trying to use a transfer mode that the hardware device cannot use.

Common Symptoms of 'I/O Device Error'

In general, you will get the following messages if your storage device unexpectedly gets the I/O device error issue:

  • 'The request could not be performed because of an I/O device error'.
  • 'I/O error 32', 'I/O error 21' or the similar 'I/O error + codes'.
  • 'Only part of a read process memory request was completed' or 'Only part of a write process memory request was completed'.

So, how to solve this issue? Click the Play button to learn how to fix i/o device error Windows 10/7

I-o

Actually, regardless of why and how the I/O device error message is triggered, it is strongly recommended for data of the affected drive to be transferred or backed up before any attempts to fix the issue. All of the files and data stored on the affected drive are at the risk of being lost completely in the occurrence of the I/O error.

However, how to get lost data back from this damaged drive effectively?

Part 2: Recover Data from Drive with I/O Device Error

How to recover data from drive with I/O device error without affecting the original data?

We recommend MiniTool Power Data Recovery!

  • All-in-one and read-only data recovery software.
  • Excellent data recovery effect and great reliability.
  • Detailed instructions guide users to complete data recovery successfully.
  • Over 2,000,000 users download this tool from CNET.
  • Supported OS: Windows XP, Vista, Windows 7, Windows 8, Windows 8.1, Windows 10, Windows Server 2003, Windows Server 2008 (R2), and Windows Server 2012.

In short, using MiniTool Power Data Recovery, you can easily and quickly recover lost data without damaging the original data. It is a tool with high security, excellent performance, and simple operations.

Next, let's see the detailed steps of data recovery.

Step-by-step Guide to Recovering Data from Drive with I/O Device Error

Prepare work:

  • Connect a working, non-affected drive to a computer.
  • Download MiniTool Power Data Recovery.
  • Install it on the connected drive.
Warning: Do not install Power Data Recovery on the drive containing lost data. The original data could be overwritten and there is no way to recover them.

Step 1. Launch MiniTool Power Data Recovery, and then select suitable data recovery module.

Power Data Recovery is equipped with 4 functional modules:

  • This PC, the default data recovery module to recover data from an existing partition. Generally speaking, this module can recover lost data as long as a partition exists. For instance, you can use this feature to recover data from drive showing 0 bytes.
  • Removable Disk Drive recovers photo files, music files and video files from storage devices such as memory card and USB flash disk.
  • Hard Disk Drive is designed for data recovery from hard drives, including partitions that are accidentally deleted or attacked by viruses.
  • CD/DVD Drive recovers lost and deleted files from damaged scratched or defective CD and DVD discs.

Here, we will use This PC for example.

Step 2. Select the drive you want to recover, then click Scan to scan for desired data in the disk sector by sector. For the best recovery result, please wait until the full scan is complete.

Note: You can click Settings to configure the scan to scan for specific file systems and file types. For example, to recover only pictures or photos, check the option 'Graphics & Picture', as shown below.

Step 3. Verify the files recovered are there, and then click Save to store them on a safe place.

  1. Preview: before recovering files, you can preview the attributes such as file name and file size of the selected file on the right side. You can also preview photos before saving.
  2. Find: find a specific file using the file name
  3. Filter: filter files by file name, file size, creation time, etc. For instance, if you only want to recover photos, you can choose '*.jpg,*.gif,*.png,*.psd,*.tif” to filter out other types of files.
  4. Export Scan Result: after scanning for recoverable files, we can export the results to a specific location so we can load previous results in the future without rescanning.

To recover data, use MiniTool Power Data Recovery Pro by purchasing and registering a MiniTool license key.

After recovering lost data, let's see how to fix the external hard drive I/O error.

Part 3: How to Fix The 'I/O Device Error' Problem

Here are 6 solutions fix the i/o device error Windows 7, Windows 8 and Windows 10.

Solution 1: Ensure the storage device connection is working correctly

The affected storage device might not have been connected properly. To check the connection, disconnect the storage medium and connect it with another USB port, USB cable, USB adaptor, or USB card reader. Data on the device should be able to be read as usual if this is caused by a faulty connection.

Solution 2: Download, install or update your device driver

If the computer storage device driver is outdated, damaged or incompatible with your attached device, it might affect its input/output functionality.

Download, install or update your device driver, and then disconnect and reconnect this device to see whether if I/O is fixed.

Solution 3: Change drive letter

If the external drive is detected with a wrong drive letter, its I/O functionality will be affected because the computer would be reading from the wrong or non-existent drive.

You can change the drive letter to fix this issue. To do so without affecting the original data, you should use MiniTool Partition Wizard, a free, simple and professional partition magic.

Step 1. Download and install MiniTool Partition Wizard, and then launch it.

Step 2. Select the drive and choose 'Change Drive Letter' feature from the action panel.

Step 3: Choose a drive letter from the list. Click 'OK' to go back to the main interface.

Step 4: Click 'Apply' button to perform this operation.

Solution 4: Check and repair disk errors on drive

I-o Data Network & Wireless Cards Driver Download

You can Run Check Disk from a Command Line to Check for and fix Disk Errors.

Step 1: Open the command prompt. Note: you have to run CHKDSK commands as an administrator to have the necessary privileges to execute the scan.

Step 2: Type 'chkdsk /f x:' into the command prompt and press Enter. The letter 'x' should be replaced with the letter name of the drive you'd like to run the scan on.

Step 3: Finally, type 'exit' and press Enter.

Solution 5: Change the transfer mode for the drive in IDE channel properties

Windows cannot transfer data from the drive to the computer if the transfer mode for the drive was changed or was incorrect. Follow these steps to change the transfer mode to fix this problem.

Step 1: Press Start button.

Step 2: Right click This Computer or My Computer.

Step 3: Select Manage.

Step 4: Select Device Manager.

Step 5: Expand IDE ATA/ATAPI controllers. You will see a list containing various IDE ATA/ATAPI channels for your PC.

Step 6: Right-click the channel where the external drive is connected, and then click Properties. Typically, the channel that is usually used for external hard drives is Secondary IDE Channel.

Step 7: Select PIO Only option in the box labeled Transfer Mode for the device representing your external hard drive on the tab labeled Advanced Settings. Usually, this is Device 0. Close all windows after clicking OK button.

Step 8: Restart computer and check the drive.

Solution 6: Format the hard drive

I-o Data Network & Wireless Cards Driver Download 64-bit

If all above solutions cannot help you, you can try formatting your hard drive. If you don't know how to format hard drive with ease, you can try formatting your drive easily and quickly with MiniTool Partition Wizard using its concise interface and guidance.

Note: If formatting does not work either, your drive must be seriously damaged. In this case, you have no choice but to replace it with a new one.

Bottom Line

Have you ever encountered this message: 'The request could not be performed because of an I/O device error'?

Now, you can try the above 6 solutions to fix this I/O device error external hard drive and internal hard drive. Remember to recover your lost data in this drive before trying the solutions.

Like this post? Share it to help more users get rid of the I/O device error.

If you have any question about data recovery with MiniTool Power Data Recovery, please feel free to contact us via[email protected].

IOLAN DS I/O Device Server

  • Remote access and control of digital I/O and relays
  • Universal Digital I/O, Analog input, RTD/Thermocouple temperature sensor input & RS-232/422/485
  • 10/100 Ethernet interface with 1.5kv isolation (802.3 standard)
  • Terminal block connectors for power and I/O

Perle’s Ethernet I/O technology (IOLAN DS I/O Device Servers) enables comprehensive access and control of remote digital I/O, analog I/O, pulse I/O, relays and temperature sensors as well as connections of remote serial equipment on any IP network. The IOLAN DS I/O has the ability to monitor environmental alarms, intrusion detection, relay contact closures and equipment failure. Through remote operator or application control, opening and closing of integrated relay contacts or activation of digital output signals can be incorporated into any response of a critical event.

Management, Monitoring and Control of High-Value Distributed I/O Assets
Ideal for

  • The monitoring and protection of high-value distributed I/O assets and access to its data. This also involves the protection and control of the physical environment along with the ability to take corrective action when necessary. Digital and analog sensors, proximity and mechanical switches, relays, pushbuttons, temperature and humidity sensors can assist in determining the integrity of the asset’s local environment. Information from these sent back to a central support location over a network can help an enterprise react more quickly to an important event or failure.

Why IOLAN DS I/O Device Servers are the preferred choice:

  • Universal Digital I/O, Analog input, RTD/Thermocouple temperature sensor input and EIA/RS-232/422/485 offer flexibility for a wide range of applications
  • Digital I/O Extension provides a cable replacement solution by transmitting digital input signals to a remote output peer over an IP/ Ethernet network
  • Attached I/O devices can be Modbus UID addressable for operational compatibility
  • Plug & Play installation utility eliminates configuration hassles for all IOLAN’s on your IP network
  • Advanced event management using Syslog, and SNMP V3 event notification
  • Central management capabilities via a Perle Device Manager for Windows
  • Access IOLAN DS units using common web browsers or command line interface
  • Software Development Kit available to develop powerful custom applications

Access I/O Devices over Ethernet using Popular Central Applications

An IOLAN I/O Device Server is ideal for remote I/O management using common SCADA or OPC Servers using Modbus/TCP protocol as well as Network Management Systems ( NMS) utilizing SNMP.

Flexible and Reliable COM/TTY Access to Ethernet I/O

An IOLAN I/O Device Server is ideal for connecting COM/TTY based applications such as Modbus ASCII/RTU to remote I/O devices. Perle’s TruePort re-director provides COM port or fixed TTY connections across an IP network.

An Application Program Interface ( API ) is also available so that custom applications can be developed to access distributed I/O channels attached to remote IOLAN I/O Device Servers. Common serial applications such as Visual Basic can be used to send IOLAN API commands to remote IOLAN I/O Device Servers across an IP network. This API is available for the most popular operating systems today.

Universal I/O

The IOLAN DS I/O device server connects to a wide variety of distributed I/O devices.
For examples click here.

Universal I/O on IOLAN I/O Device Servers provides flexibility when used across a wide array of environments. Individual digital channels can be configured as either inputs or outputs. Analog Inputs can support a broad range of voltage or current type devices including industrial grade temperature sensors such as thermocouples and RTDs.

Models with integated solid state relays can be used to control remote contact closures.

Automated response to alarm conditions

IOLAN DS I/O Device Servers have the capability of measuring input conditions and intelligently alerting enterprise resources such as central TCP/IP based applications, Syslog or SNMP. By instantly generating alerts when pre-defined threshold levels have been exceeded, alarm notifications can be passed along when needed. This eliminates the packet based overheads associated with polled environments.

I-o Data Network Group

Rugged Industrial-Grade Design

Compact and protective metal enclosure for wall mount or DIN rail mounting environments. Industrial grade unit protection is provided though optical isolation of I/O channels of 2000 Vrms, Ethernet isolation of 1500 Vrms, open/short detection logic on RTD/Thermocouple inputs and 15,000 volts electrostatic discharge protection across all serial pins.

Advanced IP Technology

With support for Next Generation IP (IPv6) the IOLAN range provides organizations with investment protection to meet this rapidly growing standard.

Demand for IPv6, which is compatible with IPv4 addressing schemes, is driven by the need for more IP address. With the implementation and rollout of advanced cellular networks, a robust method is needed to handle the huge influx of new IP addressable devices on the Internet. In fact, the US Department of Defense has mandated that all equipment purchased be IPv6 compatible. In addition, all major Operating Systems such as Windows, Linux, Unix and Solaris, as well as routers, have built-in support for IPv6.

It is therefore important for end users and integrators to select networking equipment that incorporates the IPv6 standard. The IOLAN line with support for IPv6 already built in, is the best choice in serial to Ethernet technology.

Lifetime Warranty

The Perle IOLAN DS is backed by the best service and support in the industry including Perle’s unique lifetime warranty. Since 1976 Perle has been providing its customers with networking products that have the highest levels of performance, flexibility and quality.

Technical Specs for Perle I/O Device Servers
IOLAN DS1 D4, DS1 A4, DS1 D2R2, DS1 T4, DS1 A4R2, DS1 A4D2

Main ProcessorMPC852T, 66 Mhz, 87 MIPS
Memory
RAM MB16
Flash MB4
I/O Processor
ATMEG48, 16 MIPS
Network/Ethernet
1 x 10/100Mb RJ45
1.5 KV magnetic isolation
I/O Connectors
Removable terminal blocks
Digital I/O
2 or 4 channels depending on model
software selectable as inputs or outputs
optical isolation of 2000V rms
Digital Input
Dry ContactLogic 0 = open. Logic 1= close to GND
Wet ContactLogic 0 = 0-3VDC, Logic 1= 10VDC-30VDC
Digital Output
Open collector to 30VDC ( source, sink or both )
200 mA max load
Digital out ( DO ) or pulse mode
Relay
Form C type SPDT
Contact rating[email protected], 0.5A @AC: 120VAC
Breakdown voltage500 VAC (50/60 Hz)
Relay on time7 msec; Relay off time: 3 msec.
Total switching time10 msec.
Insulation resistance1000 MW minimum at 500 VDC
Analog Input
Channels4 differential
16-bit resolution
Input range±150 mVDC, ±500 mVDC, ±1 VDC, ±5 VDC, ±10 VDC, 0-20 mA, 4-20 mA
Optical Isolation3000 VDC
Fault and overvoltage protectionup to ±35 V
Sampling rate10 samples/sec.
Input impedance20 M Ohm
Accuracy±0.1% or better
Zero drift±5 µV/° C
Span drift±25 ppm/° C
CMR @ 50/60 Hz90 dB min
Thermocouple Input
TypesJ, K, T, E, R, S, B
Isolation voltage2000 VDC
Sampling rate10 samples/sec.
Accuracy±0.15% or better
Zero drift±5 µV/° C
Span drift±25 ppm/° C
CMR @ 50/60 Hz130 dB
RTD ( Resistance Temperature Detector )
Channels4 differential inputs
Input typePT100, PT1000, Ni 518
Optical Isolation2000 VDC
Sampling rate10 samples/sec
Accuracy±0.05% or better
Zero drift±2.5 µV/° C
Span drift±25 ppm/° C
CMR @ 50/60 Hz130 dB
Protocols
IPV6, IPV4, TCP/IP, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP, Telnet, raw, reverse Telnet, MODBus/TCP, RCP, WINS, HTTP, SNMPV3*
Management
Via Web browser
Perle DeviceManager software to manage single or multiple device servers
CLI – Telnet or shared console port
Menu
SNMP, MIB II, Perle MIB, read and write capabilities
SYSLOG
Easy Configuration Wizard
Failsafe modeDefault outputs if loss of communication occurs
Set a personalized factory default for IOLANs
Serial Port
Software selectable EIA/RS-232/422/485
DB9M connector
Full modem and hardware flow control on RS-232
50bps to 230Kbps for EIA-232
Customizable baud rate support for unique speed requirements
up to 230Kbps for EIA-422/485
SUN Break Safe
Full bidirectional modem support
15Kv ESD protection on all signals
EIA 232 full duplex
EIA 422 full duplex
EIA 485 4 wire, full duplex
EIA 485 2 wire, half duplex, with echo
EIA 485 2 wire, half duplex, without echo
Indicators
Power/Ready
Network Link activity
SerialTransmit and Receive data LEDs
Dimensions, Weight
Dimensions(L x W x H): 12.7 x 9.2 x 4.5 (cm)
Weight0.5 kg
Power
9-30V DC on terminal blocks.
Optional AC adapters available from Perle
p/n 04031154 (USA), 04031151 (UK), 04031152 (EU)
TruePort: Fixed TTY/COM port emulation software.
TruePort com/tty redirector for serial based applications on Windows, Linux, Solaris, SCO, HP UX, NCR UNIX and AIX. Perle supports the most comprehensive driver set in the industry. For a complete list of all the latest drivers click here.
Environmental
Operating Temperature0C to +55C (32F to +131F)
Storage Temperature-40C to +66C (-40F to +150F)
Reach, RoHS and WEEE Compliant
ChassisMetal with an IP30 ingress protection rating
Approvals
FCC Part 15A, CE, CAN/CSA 22.2, UL/CN 60950, EN 55022 Class A, EN 55024 Class A, CFR 47, ICES-003, IEC 60950-1
Warranty
Limited Lifetime Warranty
Line Art

IOLAN DS1 D4 – 4 Digital I/O and 1 RS-232/422/485 Serial Port

IOLAN DS1 D2R2 – 2 Digital I/O, 2 Relay outputs and 1 RS-232/422/485 Serial Port

IOLAN DS1 A4 – 4 Analog Inputs and 1 RS-232/422/485 Serial Port

IOLAN DS1 T4 – 4 Thermocouple/RTD sensor inputs and 1 RS-232/422/485 Serial Port

IOLAN DS1 A4R2 – 4 Analog inputs and 2 Relay Outputs and 1 RS-232/422/485 Serial Port

IOLAN DS1 A4D2 – 4 Analog inputs and 2 Digital I/O and 1 RS-232/422/485 Serial Port

I-o Data Network & Wireless Cards Driver Download

* No SNMPV3 encryption. For full SNMPV3 support see IOLAN SDS Device Servers.