Download Libusb-win32 Others Driver

  1. Download Libusb-win32 Others Driver Windows 10
  2. Download Libusb-win32 Others Driver Handbook

Download Other Motherboard drivers, firmware, bios, tools, utilities. Installing libusb-win32 and PyUSB for MD380 / Retevis RT3 There are several ways to install libusb on a windows PC. Zadig is one possibility, and the 'classic' method described below is another. If one doesn't work, try the other:o) Download the zip archive from libusb-win32, and unzip it.

Download software in the Others category. Update all your drivers and game components, thus ensuring your computer runs smoothly and stays issue-free, with this intuitive application. Dotnet add package libusb-win32-driver -version 1.2.6 For projects that support PackageReference, copy this XML node into the project file to reference the package.

After this successful transfer of the DMR database, the RT3 / MD380 could now decodeany of the 49000 DMR-IDs in the database into callsign and operator name.
The journey of exploring the 'Experimental' firmware continues on DL4YHF's Retevis RT3 / Tytera MD380 page .

Switching from the default USB driver ('STTub30' for the Retevis/Tytera CPS) to libusb

If you frequently switch between the normal CPS ('Customer Programming Software') and the MD380-Tools, consider touse Zadig to switch from the 'STTub30' driver (which appears as 'STM Device in DFU Mode' in the device manager)to the libusb driver (or similar driver compatible with the MD380-Tools). Zadig can install or replace the currently selected driver with just a few mouse clicks.
  • Connect the radio to the USB port and turn it on (normally, not in firmware-update mode)
  • In Zadig's 'Options' menu, select 'List All Devices'
  • In the drop-down list, select 'Patched MD380' (see screenshot in the next chapter)
  • In the field right next to the green arrow, select 'libusb-win32 (latest version)'
  • Click 'Replace Driver' and wait until done.
After these steps, Python and PyUSB can be used to run the MD380-Tools.

'Switching back' to the default USB driver (for the Retevis / Tytera CPS)

Occasionally, I wanted to edit the codeplug with the original Retevis (or Tytera) CPS under windows.After installing libusb_win32 (or similar), this didn't work anymore, since the USB device(the 'Patched MD380') was now occupied by the libusb_win32 'driver' !
Unfortunately there is no way to switch back (via Zadig) to the 'original' driver.
Remember which driver was in use beforeDriver installing libusb_xyz ? Here the screenshot (in Zadig)Download libusb-win32before switching to one of the possible drivers for the MD380-Tools:

Download Libusb-win32 Others Driver Windows 10

('STTub30' was the driver installed by the Retevis CPS, in December 2016)
Since it's not possible to 'switch back' to the original driver with Zadig, I had to use the following stepsunder Windows 8.1 to get the original USB drivers back:
  • Open the Device Manager ('Start'..'Control Panel', etc etc etc or simply run 'mmc devmgmt.msc')
  • In this case, the 'Patched MD380' was listed under 'libusb-win32 Usb Devices'
  • RIGHT CLICK on it, select 'Uninstall' / 'Deinstallieren' ... but hold on, DON'T PROCEED TOO QUICK !
  • Make sure 'Delete the driver software for this device' is checked
    (on a german PC: Haken vor 'Die Treibersoftware für dieses Gerät löschen')
  • Turn the radio off and on again (or disconnect from / reconnect to USB).
    Only because we've deleted the driver software,
    windows will NOT immediately re-install the libusb_win32 driver (or whatever we installed via Zadig & Co) !
  • If the 'Patched MD380' still appears as another 'libusb' device or similar outside the 'USB-Controller' list, repeat the above step (uninstall + delete driver).
  • Sooner or later, windows surrenders, and the 'STM Device in DFU Mode' appears in under 'USB-Controller' again.
    Dr Zadig would then identify the current driver for our 'Patched MD380' as 'STTub30', as it was after a clean install of the CPS (see screenshot further above). Anything else causes the Retevis/Tytera CPS not to recognize the radio, because it can only talk to the 'STTub30' driver.
After these steps, you can start the 'normal' Customer Programming Software (by Retevis or Tytera) to load a new codepluginto your radio, or use their 'Upgrade.exe' to load a new firmware under windows (without the MD380-Tools).
back to DL4YHF's Retevis RT3 / Tytera MD380 page

Download Libusb-win32 Others Driver Handbook